Plastic bag making machine problem solution in Dubai,Ajman,Umm al-Quwain,Abu Dhabi,Sharjah,Fujairah,United Arab Emirates 

Plastic Bag Machine is the final step in the manufacturing and processing of plastic bag. If the performance of bag making process isn’t high enough or the quantity of waste is excessive, the previous processes , such as blowing film machine or composite printing machine could end up being used up and downstream customers are likely to have an enormous effects on the manufacturing and operations.

1. What can I do if my bag’s contents leak or become damaged because of the insufficient sealant of the plastic bag machine?
Cause: Low anti-pollution heat-sealability for the film, mostly due to the resin that is used in the sealing layer isn’t suitable for.
Countermeasures: Select a film that has excellent anti-pollution heat-sealability. The general rule is that ldpe has moderate anti-pollution heating capacity. EVA is a good anti-pollution heat sealability in the event that the VA contents are large. Ionic resin and metallocene-based polymer It is extremely effective in preventing pollution heat-sealability.

2.What can I do when the seal of the plastic bag machine isn’t as strong?

Video of plastic bag machine

Reasons:

1. The temperature of heat sealing is excessively high.
2. The pressure is too high.
3. The time to seal heat is too long.
4. Edge of upper section of the sealer sharp or the PTFE coating is damaged.
5. The seal on the bottom is Silicone rubber that is too for the job;
6, in the process of compounding and curing during the curing and compounding process, a portion of the adhesive gets absorbed into the film. When the substrate is impacted by the adhesive. As a result, the hardness (that is, resistance to impact) has diminished and the brittleness grown;
7 Plastic composite baggies for packing Following cooling and putting in place the bags, the durability of the heat seal improves and the bag also begins to harden.

Countermeasures:

1. Based on the heat sealing properties of the outer sealing layer material, choose the right temperatures, pressure, and time to seal the heat;

2. Improve the surface quality of the top heat sealing knife so that it makes the sealer’s surface smooth;

3. Wrap the cloth with polyethylene. The wrapping is still intact.

4. Select a pad made of silicone that is of the right degree of hardness.

What can I do if my bag starts to shrink after being sealant by the bag maker?
The reason:
1. The film’s thickness is variable;
2. The temperature for heat sealing is too high, or the time to seal can be too lengthy.
3. In the heat sealing knife’s longitudinal section The running path of composite films isn’t straight.
4. Insufficient cooling.
5. The time for curing isn’t enough.
6. The film on the surface is not very resistant to heat.
7. Inadequate control of the tension-matching to the substrate of the composite during the process of compounding causes residual stress following curing and setting, particularly in cases where the composite film is smaller this type of failure is more likely to occur.
Countermeasure
1. The tension can be adjusted on the roller floating.
2. Utilize an inner sealing base material that has low temperature heat sealability.
3. Adjust the temperature of the heat seal to the appropriate temperature.
4. It is important to cool down.
5. Create a film that is mature.
6. Re-select the film on the surface.
7. Adjust the tension on each component of the composite processing equipment, and then try to ensure that both substrates shrink the same.

What can I do if I notice that the outer shape of the heat-sealed exterior of the bag-making machine isn’t clear after sealing? (The knife’s pattern isn’t evident)
The reason is:
1. The cooling process is short.
2. The cooling plate is not in good contact with the plate
3. When the pad of silicone is heated, the edges melt.
4. Forces of heat sealing in the longitudinal direction that are not balanced
5. Its edge on the heat sealing knife is sloping and blunt.
Countermeasure
1. Set the cooling time.
2. Adjust the cooling plate to your liking.
3. Adjust or replace the knife that seals heat
4. Avoid melting at the edge due to overheating of the silicon pad.

What can I do if the sealing capacity of the bag maker is weak after sealing?
the reasonfor this:
1. The adhesive contained in the composite film hasn’t been properly cured.
2. The conditions for heat sealing are not appropriate.
3. Between the knife that seals the temperature and the cooling knife is too long.
4. There is an issue with the inner layer of sealing.
5. The ink’s heat-sealability is weak, resulting in a reduction in the strength of composites of the film in the sealed part.
6. Dust and spray powders as well as other substances stick on the cover.
7. The strength of the composite is not high or the strength of the heat sealed place decreases too much.

Countermeasures:
1. Help to promote the hardening process of adhesive (curing or curing) by preserving heat and aging. This will improve the strength and resistance to heat of the film.
2. Find the ideal conditions for heat-sealing (temperature as well as time and pressure) in accordance with the structure of the material, its heat-sealing state and so on. Or, you can enhance the method of heat-sealing, and then cool down right away after the heat-sealing process.
3. Examine the shelf time and storage conditions of the film that is heat-sealable. If the film is made of the film from the previous batch and also the film has been sealed with heat requires special attention, it is recommended to do so.
4. The thickness of the film that can be heat-sealable.
5. Modify the type and the grade of the film that can be heat-sealable and choose a film that has anti-pollution heat-sealability.
6. Verify that the quality of the adhesive meets standards (the release of low-molecular substances in the resin can alter how the glue is made)
7. Improve the heat sealing efficiency in the layers of heat. regulate the contents of the slip agents and utilize the mlldpe film.
8. Monitor the monomer concentration in MDI within the composite adhesive.

What can I do if the formation of air bubbles, or uneven surface are found in the heat-sealed area of the bag-making machine?
The reason:
1. When heat-sealing is applied to an object made up of hygroscopic material like nylon film the hygroscopic film can create air bubbles after it is absorbed by moisture.
2. The heat-sealing blade or pad of silicone is not even.
3. Insufficient pressure for heat sealing.
4. One-component adhesives, like neoprene adhesives when sealing bags with heat are used, the heat cover can be prone to pits.
Countermeasures:
1. Make sure to store the semi-finished and raw materials in a proper manner to prevent the absorption of moisture.
2. Make sure to adjust or test or adjust the knife for heat sealing as needed and the heat sealing pad.
3. Remove the tape.

If you need any information of blown fim extrusion,plastic bag machine,printing machine,please feel free to contact us. Kingdom Machine Factory  Mobile:0086-13088651008;0086-13958812663;
Whatsapp/Viber/Tango:0086-13088651008;0086-13958812663;
sale@kingdommachine.com;kingdombillwang@hotmail.com; www.blownfilmextrusion.com; www.kingdommachine.com;
Ruian Economic Zone,Wenzhou,China

Network Server Cabinet why should I use one?

Are you putting together a data network? A Network Server Cabinet should be considered at the top of the budget list. Even if you’re only doing a small room in your house for HDTV or a large or small office environment don’t try to by-pass the Server Cabinet.

When you go all through the trouble of running a cable network you need to bring it all together inside a cabinet that can protect your server equipment and keep unwanted hands out. In this endeavor security for your network should be a major consideration. Particularly if this is a data critical network or even to keep the kids from playing near the server.

If it is a small network you can consider a small network cabinet that takes up little room but can still house your server or your video distribution equipment. You can get one for under $200.00 and you can even lock it. Now that is a big plus. Putting your HD equipment out in the open leaves it exposed to un-wanted tampering. Using a locking cabinet will save you the headache of what happened?

If you doing a large office or even a small one you should be bring the cable that goes to your computer or peripherals into a central location. From there you would branch out to rooms or desktops. The wires coming in could be telephone connections that you’re going to distribute throughout the area along with data connections that will be distributed. These connections going into a network server cabinet will provide the security and the protection of your system. Larger networks can have several cabinets banked together and cables run from cabinet to cabinet. You can even have dust free or Nema 12 type cabinets that are used in a not so clean and dust free environment. Consider all the alternatives and don’t leave your network exposed to un-wanted tampering or the environment, use a networking server cabinet.

Launched for sale on 30 May under the confirmed list of the first half 2017 Government Land Sales programme, Park Colonial at 1 Woodleigh Lane is one of upcoming projects in Singapore for 2018. This development will also add an unique look to the new estate of Bidadari Singapore and has the potential to ride on the rejuvenation of the neighbourhood.

Park Colonial is located just next to Woodleigh MRT station and is jointly developed by CEL Unique Development, which is 60 per cent owned by Chip Eng Seng Corp, and 40 per cent by Unique Real Estate. Unique Real Estate is a joint venture of Heeton Holdings and KSH Holdings units.

The land parcel is located opposite to the Upper Serangoon Road land site next to Woodleigh MRT station. A tender for a mixed-use development closed in June at $1,181 psf. The estimated number of residential units for the site is 735.

Another exciting ingredient is the development prospects of the former cemetery site at Bidadari Estate, spearheaded by close to 11,000 new public housing units and a potential new “Junction 8” on the Upper Serangoon Road site.

Park Colonial, at Woodleigh Lane, is located adjacent to Bidadari Singapore New Town, besides Woodleigh MRT station, and is also close to NEX shopping mall and various schools including St Andrew’s Secondary School, Maris Stella High School and Stamford American International School. Other upcoming projects in Singapore before Park Colonial is Woodleigh Residences on the other side of Upper Serangoon Road.

As the location of this site is supported by existing amenities and located right on a transport node, and this site also bodes well for the unfolding of the Bidadari growth story as an upcoming private and public residential address. This is exciting news for future dwellers in this precinct.

You would further understand this development, when you do visit park colonial location and show gallery or park colonial site plan and floor plans so that you can thoroughly experience the massive potential you may gain in the near future.

Please do not hesitate to contact us by emailing to us @ https://parkcolonialcondo-official.com